Haltech E6GMX Manuel d'utilisateur Page 67
- Page / 114
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
E6GMX Manual
67
To adjust the colour or channel properties the user selects the desired channel and can then
select the Channel Colour button or Properties button to adjust the channel colour and ranges.
The Properties button controls the range of the view (min and max scale), the unit name and
precision. Note if the user wishes to use manual scaling, then min and max numbers selected
must be different. It should be noted that with the exception of colour, HalwinX will save
these settings so they can be reused.
Another method of displaying channels is to double click on channels on the right hand side
of the view. As the user selects a Dataset the channels associated with the view appear to the
right hand side of the view. To add the channel to the view the user simply double clicks on
the channel and to remove it from the view the user double clicks on the channel already
loaded. Note displaying the channels this way implies that the channels from Dataset 1 to 5
are mapped to views 1 to 5 respectively.
9.1.4.2 Changing scales on a View
If the user has multiple scales loaded onto a view then the user can change scales and units by
using the Pg Up and Pg down keys.
9.1.4.3 Viewing Multiple Datasets
The Data Viewer allows you to load more than one Dataset. Each Dataset is kept in a separate
file. This allows you to compare the Datasets. The channels from each Dataset can be
accessed by selecting the relevant Dataset from the ‘Loaded Data Sets’ window.
9.1.4.4 Removing A Dataset
To remove a loaded data set, select the ‘Dataset Window’ and select the Dataset you wish to
remove. The ‘Dataset Window’ can be displayed by selecting Data->Show Data Window or
by pressing Ctrl–Alt–D. To remove the selected Dataset, return to the Data Viewer window
and select Data->Remove Dataset or by pressing the ‘Remove Dataset’ button (Next to the
file open button) or by pressing ‘Alt-BkSp’.
- Warnings 1
- Contents 2
- Introduction 7
- Before You Begin 8
- How It Works 10
- SECTION 1 Getting Started 11
- 1.2.4 Connect the ECU 12
- 2.1 Computer Requirements 13
- 2.2 Operating the Software 13
- 2.2.2 Running the Software 15
- 3.1 The Menu Structure 16
- 3.1.1 The File Menu 16
- 3.1.1.1 Load From File 17
- 3.1.1.2 Save To File 17
- 3.1.1.4 Quit 18
- 3.1.2 The Map Menu 19
- 3.1.2.2 Ignition Maps 20
- 3.1.2.3 Fuel Correction Maps 21
- 3.1.3 The Set-up Menu 22
- 3.1.4 The Options Menu 22
- 3.1.5 Data Page Menu 22
- 3.1.6 Password Protection 23
- 3.2.1 Going Online 24
- 3.3 Hot Key Summary 26
- 4.2 The ECU Set-up Pages 27
- 4.2.1 Main Set-up Page 27
- 4.2.2 Fuel Set-up Page 29
- 4.2.3 Ignition Set-up Page 32
- 4.2.4 Trigger Setup 34
- 4.2.5 The In/Out Set-up Page 35
- HALTECH MAPS 38
- 4.3 What are Maps? 38
- 4.4.2 All Ranges 40
- 4.4.3 Percentage Changes 40
- 4.4.4 Linearise 41
- 4.4.5 Numeric Mode 43
- 4.4.6 3D View 44
- 4.5 The Haltech Maps 45
- 4.5.3 Fuel Correction Map 45
- 4.5.5 Zero Throttle Map 47
- 4.5.6 Full Throttle Map 47
- 4.5.7 Turbo Waste-gate Maps 48
- 4.6 Dual Maps 48
- 4.6.1 Editing Dual Maps 49
- SECTION2 Tuning The Engine 50
- 5.5.4 Tuning for Idle 53
- 5.5.5 Tuning with No Load 53
- 5.5.6 Loading the Engine 53
- 5.5.7 Fine Tuning the Engine 54
- CHAPTER 6 THROTTLE EFFECTS 55
- 6.1 Throttle Response 55
- 6.2 Zero Throttle Map 56
- 6.3 Full Throttle Map 56
- 7.1 Cold Cranking 57
- 8.1 Fuel Versus Air Temp Map 58
- 8.2 The Battery Voltage Map 58
- 8.3 The Ignition Coolant Map 58
- 8.5 Barometric Correction 59
- 8.6 Post Start Enrichment 62
- SECTION 3 Software Features 63
- 9.1.3 Logging the Data 64
- 9.1.4 Displaying The Data 65
- 9.1.4.1 Displaying Channels 66
- 9.1.4.4 Removing A Dataset 67
- 9.1.4.5 Data Values 68
- 9.1.4.6 Zooming 68
- 10.1 Idle Speed Control and O 72
- Closed Loop Control 72
- 10.1.1 Idle Control 72
- 10.2 The PWM Options Page 76
- 11.10 Turbo Timer (TT) 82
- 11.11 NOS Switch 82
- 11.12 Anti-Lag Switch 83
- 11.13 Air Conditioning 84
- 11.14 Engine Control Relay 84
- 11.15 VTEC 85
- 11.16 BAC2 85
- 11.18 TPS Switch 86
- SECTION 5 Appendices 88
- A.1 Control Program Problems 89
- A.3 Starting problems 90
- A.4 Idling Problems 90
- A.6 Full Power Problems 91
- A.8 Cold Running Problems 91
- A.9 Fuel Consumption 91
- Ignition 92
- B.7 Ignition Outputs 93
- Constant Duty 93
- Constant Charge 94
- APPENDIX C INJECTORS 100
- C.1 Injector Impedance 100
- C.2 The Injector Drivers 101
- APPENDIX D FUEL SYSTEMS 102
- D.1 Duty Cycles 102
- D.2 Fuel Requirement 104
- D.3 Injector Flow Capacity 104
- D.4 Fuel Pump Capacity 105
- E.1 Trigger Edge 106
- E.2 Trigger Angle 108
- E.3 Trigger Pull up 109
- E6GMX Manual 113
- E6GMX Hardware Options 113
- LIMITED WARRANTY 114
Produits connexes et manuels pour Pour la voiture Haltech E6GMX
Pour la voiture Haltech E6M Manuel d'utilisateur
(152 pages)
(152 pages)
Pour la voiture Haltech E6K Manuel d'utilisateur
(154 pages)
(154 pages)
© 2020, manymanuals.fr. Tous droits réservés | 1.809 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels