Haltech IQ3 Logger Dash Manuel d'utilisateur télécharger pdf (Page 3)

11) After you left click, the Display Page Setting box will appear. You can configure the following Options:

Channel to Display --> Drop Down Menu, selects what is to be displayed.

Decimals to Display --> How many decimals are displayed for the current channel.

Averaging Filter --> No need to change, leave at default value.

Channel Tag Text --> What is displayed on the dash for that channel, max of 5 Characters.

12) Do this for each channel until each channel you want to be displayed is selected. After configuring each

channel, Click SEND Configuration. After all channels are Sent, Click OK.

13) Everything should now be displaying on your IQ3 Logger Dash.

10) To change what is displayed, Left Click on any of the boxes that have a red line pointing to the screen.

You have a maximum of 7 Channels per page possible, with 4 total pages to configure. This means you

can display up to a maximum of 28 different sensors/channels from the Haltech ECU.

14) If you need to change the units displayed for a particular channel (for example, Celsius to Fahrenheit,

AFR to Lambda, mBar to PSI, etc, do the following.

15) Go to the Main Menu as seen below and Right Click on the Channel you wish to alter.

1 2 3 4 5

Pas de commentaire

Haltech IQ3 Logger Dash Manuel d'utilisateur Page 3