Haltech IQ3 Logger Dash Manuel d'utilisateur télécharger pdf

TMTM

Haltech USA

704 Downs Ave.

Lexington, KY

(P) 760-598-1941

(F) 760-598-1987

RACEPAK IQ3 LOGGER DASH

PROGRAMMING

To program an IQ3 Display Dash, follow the steps below.

1) Connect the IQ3 dash to your Haltech Platinum Sport ECU - Supply Power to the ECU

2) Connect the IQ3 dash to your laptop via the Serial to USB Adapter

3) Open the Racepak Datalink Software

4) Press CTRL+Z and select the file . IQ3 PSPORT LOGGER

5)Go to Settings--> Scan Com Ports

This file must be placed in C:\RacepakData\IQ3 and can be downloaded from the Haltech website here

1 2 3 4 5

TMTMHaltech USA704 Downs Ave.Lexington, KY(P) 760-598-1941(F) [email protected] IQ3 LOGGER DASH PROGRAMMINGTo program an IQ3 Display

Page 2

8) By default, the Iq3 Logger dash will display RPM, GPS Based Speed, AFR, Coolant Temp in F, Intake Air Temp in F, and Manifold Pressure in PSI. To

Page 3

11) After you left click, the Display Page Setting box will appear. You can configure the following Options:Channel to Display --> Drop Down Menu,

Page 4

16) For this example, we are going to use the EFI H2O Temp Channel and change from Degrees Celsius toDegrees Fahrenheit. Upon Right Clicking the Chan

Page 5

18) Click Send Configuration. The new units should be displayed on your IQ3 Dash. Check this value against the displayed value in the Haltech ECU M

Pas de commentaire

Haltech IQ3 Logger Dash Manuel d'utilisateur